Automatic Can Seamer Seaming Machine Troubleshooting & Problems Solutions & Exception Handling

Automatic Can Seamer Seaming Machine Troubleshooting & Problems Solutions & Exception Handling.

1. Fault Phenomenon: The block cans device cannot work after the start.
   • Possible Causes: The detect sensor cannot detect the jar;
     Method of Exclusion: Adjust the detect Sensor.
   • Possible Causes: The tank cylinder and solenoid valve do not work;
     Method of Exclusion: Check the cylinder and solenoid valve
2. Fault Phenomenon: Not beautiful of seamed.
   • Possible Causes: The pressure wheel needs to be adjusted;
     Method of Exclusion: Adjust the seaming wheel up and down left and right position.
3. Fault Phenomenon: One side is seaming good, and the other side cannot seam.
   • Possible Causes: The turntable maybe offset;
     Method of Exclusion: Adjust the turntable position.
4. Fault Phenomenon: Sometimes the load lids device is jam.
   • Possible Causes: Load lids device failure;
     Method of Exclusion: Check the load lids device.
5. Fault Phenomenon: Machine shutdown due to cannot detected the lids.
   • Possible Causes: Detect lids sensor failure;
     Method of Exclusion: Check the detect lids sensor.
6. Fault Phenomenon: Seaming with no lids.
   • Possible Causes: Detect lids sensor failure;
     Method of Exclusion: Check the detect lids sensor.
7. Fault Phenomenon: Lids offset when Load lids.
   • Possible Causes: Load lids device offset;
     Method of Exclusion: Adjust the load lids device.